The hardware that comes with the Ultra Fab Skid Wheels part # UF48-979014 is not going to directly fit around a 3 inch by 3 inch beam but you could have the hardware welded to the beam instead and it would work great. view full answer...
The Progressive Dynamics 5100 Series Transfer Switch, # PD5110010Q that you linked to will automatically reroute your RV's AC input from shore power to generator power when activated. While many manufacturers will source parts from the same supplier, the case that each unit is mounted in may be similar, but this is not the same item as available from Go Power simply relabeled.
I may not be fully understanding what your objective is but if you are wanting to isolate your battery bank,... view full answer...
Thanks for the picture, it looks like you'll just be needing the Replacement Push-Button Switch for Ventline Trailer Roof Vents # BV0199-03. view full answer...
If you had the 6 gallon Hott Rod conversion kit part # DGR6VP the replacement element would be the part # DGR6P2PB or if you had the 10 gallon version part # DGR10VP you'd need the part # DGR6P10PB. view full answer...
I got you covered, for your Ventline V2094 Roof Vent you'll need:
-The Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents # BVD0215-00 for the replacement fan blade,
-The Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans # BVD0218-00 for the replacement motor,
&
-The Replacement Mini-Rocker Switch for Ventline Ventadome Trailer Roof Vents # BL0108-00 for the replacement switch. view full answer...
The Rear View Safety Wireless Backup Camera System - 4.3 # RVS-091407 is a setup you could have installed on your BT Cruiser and have it wired up so that it would be all the time if wanted. It's not a custom fit setup for your RV but the universal design of these kits allows it to fit easily. view full answer...